Technical Glossary -- (Kurt Smith)


Note: You may download the entries for this glossary here. If you wish to use this in your own Moodle course, first make a blank glossary and then follow the instructions for importing glossary entries here.

Kurt says:" A combo of ICT business and mobile phone terms. From my own entry and by incorporating some other glossaries. Anyone who has something similar let me know. Mobile phones in particular.



Browse the glossary using this index

Special | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | ALL

Page:  1  2  3  4  5  6  7  8  9  10  ...  36  (Next)
  ALL

.

.JPG

JPEG (usually pronounced JAY-pehg) is a term for any graphic image file produced by using a JPEG standard.

1

1G

Also known as: First Generation 1G (First Generation) is the name given to the first generation of mobile telephone networks. These systems used analogue circuit-switched technology, with FDMA (Frequency Division Multiple Access), and worked mainly in the 800-900 MHz frequency bands. The networks had a low traffic capacity, unreliable handover, poor voice quality, and poor security. As the 1G networks became obsolete, their frequencies were auctioned off for use in 2G and 3G networks. Examples of these first generation mobile phone networks are AMPS (Advanced Mobile Phone Service), TACS/ETACS (Total Access Communications System / Extended Total Access Communications System), NMT 450 (Nordic Mobile Telephone System) and NTT (Nippon Telegraph and Telephone System).

2

2.5G

Also known as: Second Generation 2G (Second Generation) is the generic term used to refer to the second generation of wireless mobile telephone networks, which were the first to feature purely digital technology. As demands for the quality and quantity of mobile communication services increased, 2G systems were the logical next stage in the evolution from the 1G (first generation) analogue systems. Typical characteristics of 2G include roaming, better high-bit-rate voice quality, improved security with different levels of encryption, the ability to convey some data (e.g. SMS) as well as speech, and a wider selection of subscriber services. Examples of the major second generation digital mobile telephony systems are: GSM (Global System for Mobile Communications) in Europe, IS-95 (CDMAone) and IS-136 (D-AMPS / TDMA) in the USA, and PDC (Personal Digital Cellular) in Japan

2G

Also known as: Second Generation 2G (Second Generation) is the generic term used to refer to the second generation of wireless mobile telephone networks, which were the first to feature purely digital technology. As demands for the quality and quantity of mobile communication services increased, 2G systems were the logical next stage in the evolution from the 1G (first generation) analogue systems. Typical characteristics of 2G include roaming, better high-bit-rate voice quality, improved security with different levels of encryption, the ability to convey some data (e.g. SMS) as well as speech, and a wider selection of subscriber services. Examples of the major second generation digital mobile telephony systems are: GSM (Global System for Mobile Communications) in Europe, IS-95 (CDMAone) and IS-136 (D-AMPS / TDMA) in the USA, and PDC (Personal Digital Cellular) in Japan

3

3-Way Calling

Also known as: Conference Call 3-Way Calling (Conference Call) is a network facility that enables three or more parties to be connected together in a conference call, so that they may all speak and listen simultaneously. This is often used as a convenient substitute for a physical meeting, as the participants can be located in different towns, or even in different countries. This feature is very useful when two friends are having a conversation and they need to ask questions of a third person instead of hanging up and calling back, the third party can be dialled during the course of the conversation to set up a conference call

3G

Also known as: Third Generation 3G (Third Generation) is a generic term used to refer to the latest standard of wireless mobile telephone networks. Third Generation phones are capable of the high data rates, wide bandwidth and increased capacity needed to support the new range of digital services available for mobile devices, such as Internet access, multimedia applications, and support for global roaming. The major multiple access transmission technique used in 3G is CDMA, a packet-switching technology, which provides a more efficient use of the available spectrum than did the earlier methods of FDMA and TDMA. The two main 3G technologies used are UMTS with wideband CDMA (W-CDMA) in Europe, and cdma2000™ with multi-carrier CDMA (MC-CDMA) in the USA. Many 3G systems will operate in the 2 GHz frequency band, and are designed to provide a range of data rates from 144 kbps to 2 Mbps, depending on the user's location and circumstances. The 3G mobile communications standard was a programme led originally by the ITU under the IMT-2000 project, and handsets and networks are now generally defined as UMTS (Universal Mobile Telecommunication Service). However, despite the intention that the IMT-2000 specification would result in a single, unified 3G system, several different versions of 3G have developed due to the leading telecommunications companies choosing to take a more evolutionary approach to upgrading their networks

A

A5

A5 is the encryption algorithm commonly used by GSM networks in Europe. It has a 64-bit key, although in practice at least ten of these bits are unused. A weaker version of A5 called A5/2 is exported to some countries, including Australia. It was originally a secret algorithm but was eventually leaked, which helped the case for using the open Kasumi algorithm as a replacement for A5. Comp128 is the more common GSM alternative to A5

AAC

advanced analogue coding

Abandoned Call

Abandoned call is one in which a connection is made with the recipient, but the caller then decides to terminate the call before any proper communication is established. Organisations usually wish to keep abandoned calls to a minimum, as they may indicate a slow response to incoming calls

AC Wall Charger

AC Wall Charger is an essential accessory for use with mobile�phones and other electronic devices. The charger enables the mobile device to be powered, and for its battery to be recharged, by connecting it to a mains electricity supply socket. AC wall chargers are often the only means of recharging the battery, and are usually supplied with a phone as they are designed to work with a particular product or type of battery. Wall chargers should not be interchanged without first taking advice, or expensive damage could result. Also note that it is normal for chargers to get warm while in use

Page:  1  2  3  4  5  6  7  8  9  10  ...  36  (Next)
  ALL